What are Garage Door Sensors and Why Do You Need to Wire Them?
Garage door sensors are small devices that, when installed properly and wired correctly, will help keep your garage door from moving when an object is in its path. This is a safety feature that helps to prevent property damage and personal injury. The sensors are usually attached to either side of the garage door and are wired to the control panel or opener. When something is in the way of the door, the sensors will trigger the door to reverse and open back up. Wiring your garage door sensors is a relatively easy task and should only take a few minutes to complete.
The sensors themselves are usually small, black boxes with two wires coming out of them. There is a transmitter and a receiver. The transmitter is the one that is wired to the control panel, while the receiver is the one that is connected to the garage door opener. Wiring them together is simple, but it is important to make sure that the connections are secure and that no wires are crossed. This is to ensure that the sensors will work properly and will provide the safety feature you are looking for.
How to Wire Garage Door Sensors
Before you begin wiring the sensors, make sure that the power is off to the garage door opener. This is to ensure that you do not get shocked or hurt. Once the power is off, locate the two wires that are coming from the sensors and connect them to the control panel. The red wire should be connected to the positive terminal and the white wire should be connected to the negative terminal. Once the wires are connected, turn the power back on and test the sensors.
If the sensors are not working correctly, you may need to check the wiring to make sure that all the connections are secure. If the sensors are still not working, you may need to replace the batteries. It is important to make sure that the batteries are new and are installed correctly. Once the batteries are installed correctly, the sensors should be working correctly.
Pros and Cons of Wiring Garage Door Sensors
Wiring garage door sensors can be beneficial because it provides a safety feature that helps to prevent property damage and personal injury. It can also be beneficial because it helps to ensure that the garage door will open and close properly. However, there are some cons to wiring garage door sensors as well. One con is that it can be difficult to install the wiring correctly, and if it is not done properly, the sensors may not work properly.
Another con is that the sensors can be expensive to purchase and install. In addition, it can be difficult to troubleshoot the sensors if they are not working properly. Therefore, it is important to make sure that you are familiar with the wiring process before attempting to wire them yourself.
