Introduction
Garage door cables are an important component of a garage door system, as they are responsible for counteracting the weight of the door as it opens and closes. Without them, the garage door cannot open and close properly, making it difficult to access the garage. As such, it is important to repair a broken garage door cable as soon as possible. In this article, we will discuss how to repair a cable on a garage door, the pros and cons of repairing a cable, and some tips for repairing the cable.
What Are Garage Door Cables?
Garage door cables are a set of wires that attach to the bottom of the garage door and run along the sides of the door to the top. The cables are attached to springs and pulleys and are responsible for counteracting the weight of the door as it opens and closes. Without the cables, the garage door would be too heavy to open and close manually.
What Causes Garage Door Cables To Break?
Garage door cables can become worn over time, or can snap if the door is forced open or closed too quickly. The cables can also snap if the door has become unbalanced, or if the springs are not properly tensioned.
How To Repair Cable On Garage Door
Repairing a garage door cable is a relatively simple task, but should always be done with extreme caution. Before attempting to repair a cable, it is important to ensure that the power to the garage door is off. This can be done by unplugging the garage door opener or by disconnecting the power source at the circuit breaker.
Once the power is off, you will need to release the tension on the cable. This can be done by disengaging the garage door opener and manually lifting the door until the cable can be accessed. Once the tension is released, the cable can be unscrewed from the pulley or spring and the broken cable can be removed.
Pros Of Repairing Cable
The main advantage of repairing a garage door cable is that it is a relatively simple and inexpensive task. In most cases, all that is needed is a wrench and a pair of pliers. Additionally, the repair can be done quickly, allowing you to access the garage again in no time.
Cons Of Repairing Cable
The main disadvantage of repairing a garage door cable is the potential for injury. If the tension is not released properly, or the cable is not securely attached, it could snap and cause serious injury. Additionally, if the repair is not done correctly, it could cause further damage to the garage door and opener.
Tips For Repairing Cable
When repairing a cable on a garage door, it is important to ensure that the power is off and the tension is released properly. Additionally, it is important to make sure that the new cable is securely attached and that all connections are properly tightened. Lastly, it is important to make sure that the balance of the garage door is correct, as an unbalanced door can put extra strain on the cables.
Conclusion
Repairing a cable on a garage door is a relatively simple task, but it is important to ensure that the power is off, the tension is released properly, and the new cable is securely attached. Additionally, it is important to make sure that the balance of the garage door is correct, as an unbalanced door can put extra strain on the cables. Following these steps will help ensure that the repair is done correctly and safely.
