Introduction
When a garage door spring breaks, it can be tricky to figure out how to raise the garage door. This is because the springs are under a lot of tension and can be dangerous to work with. Fortunately, there are a few methods that can be used to safely raise a garage door with a broken spring. In this article, we will discuss the pros and cons of each method and provide step-by-step instructions on how to raise a garage door with a broken spring.
Using a Cable Drum
One way to raise a garage door with a broken spring is to use a cable drum. This method involves using a cable drum to lift the garage door. To do this, you will need to remove the broken spring and then attach the cable drum to the door. Once the cable drum is in place, you can start to lift the door by turning the drum counter-clockwise. This will allow you to slowly raise the door until it is in the open position.
The pros of using a cable drum to raise a garage door are that it is relatively safe and easy to do. Additionally, it requires minimal tools and can be done in a short amount of time. The cons of this method are that it can be difficult to control the rate at which the door is raised, which can lead to the door being raised too quickly. Additionally, the cable drum can be difficult to attach to the door.
Using a Jack
Another way to raise a garage door with a broken spring is to use a jack. This method involves using a jack to lift the garage door. To do this, you will need to remove the broken spring and then attach the jack to the door. Once the jack is in place, you can start to lift the door by slowly turning the jack handle in a clockwise direction. This will allow you to slowly raise the door until it is in the open position.
The pros of using a jack to raise a garage door are that it is relatively easy and safe to do. Additionally, it requires minimal tools and can be done in a short amount of time. The cons of this method are that it can be difficult to control the rate at which the door is raised, which can lead to the door being raised too quickly. Additionally, the jack could slip off the door if it is not properly secured.
Using a Come-along
A third way to raise a garage door with a broken spring is to use a come-along. This method involves using a come-along to lift the garage door. To do this, you will need to remove the broken spring and then attach the come-along to the door. Once the come-along is in place, you can start to lift the door by slowly turning the come-along in a clockwise direction. This will allow you to slowly raise the door until it is in the open position.
The pros of using a come-along to raise a garage door are that it is relatively easy and safe to do. Additionally, it requires minimal tools and can be done in a short amount of time. The cons of this method are that it can be difficult to control the rate at which the door is raised, which can lead to the door being raised too quickly. Additionally, the come-along could slip off the door if it is not properly secured.
Conclusion
Raising a garage door with a broken spring can be tricky, but it is possible. There are three methods that can be used to safely raise a garage door with a broken spring: using a cable drum, using a jack, or using a come-along. Each method has its own pros and cons and should be used with caution. It is important to consult with a professional garage door expert before attempting to raise a garage door with a broken spring.
